Does anyone know what support package level you need for SAP_BASIS 702 for Note 999712 - PDF Conversion for Unicode?
It only gives it for 620, 640, 700, and 701 even though the last sentence in the note mentions 702. I'm guessing its 8, 9, or 10 because we have a CRM system on 10 thats printing correctly and an ECC system on 7 thats not, but it would be nice to know officially.
Thanks,
Clint
Hi, all
We are in the middle of deciding if we should implement SAP content server 6.4 or not. The latest version is 6.4 which was almost 7 years old. Are you aware of any plan for SAP to have a newer release? I have searched all over in service marketplace and SDN and found no official answer.
I did find someone posted this question last year:
https://scn.sap.com/thread/2146142
Do you know if SAP's position has changed?
Thanks,
Jonathan.
Hi,
In 0CO_PC_01 data source in ECC RSA3 report, we are getting in the Cost Component column having blank values, which we are getting until yesterday. Based on this column we have built some report in BW. please suggest how to restore the Cost component column values in ECC.
Regards
Prakash.
Hello All
I have an old BW legacy system 3.5 but technically upgrade
to 7.0 – and for some good reasons we have implement a completely new BW 7.3 landscape
- and I have to bring some critical data
flows into the new landscape from the legacy landscape – I have create a
transport in the legacy BW system and I would like to bring into the new 7.3
landscape , both the systems are not connected and separate landscape–
We are on Windows and SQL
Any help will be highly appreciates..
Anees Abbasi
Hello All
I have an old BW legacy system 3.5 but technically upgrade
to 7.0 – and for some good reasons we have implement a completely new BW 7.3 landscape
- and I have to bring some critical data
flows into the new landscape from the legacy landscape – I have create a
transport in the legacy BW system and I would like to bring into the new 7.3
landscape , both the systems are not connected and separate landscape–
We are on Windows and SQL
Any help will be highly appreciates..
Anees Abbasi
Hi there
Does anybody know if SAP will release a Sneak preview trial version of Netweaver 7.4 (with or without HANA)
SAP are really pushinG HANA so I'm surprised there isn't a Sneak Preview version available yet.
Cheers
Hello,
I need to consume a web service in ABAP from a non-SAP application. The web service uses wsse:UsernameToken with PasswordDigest in the SOAP Header for authentication. However, I havent seen any documentation for using Password Digest in ABAP.
Is it possible to use Password Digest in ABAP?
Thanks
Ajay
hello Team,
i have taken an offline backup of our Netweaver 7.3 on windows server 2008 with oracle 11g,after the backup is done disp+work.exe is unable to start.
I am pasting the "dev_w0" log and "dev_disp" log
-------------------------------------------------------------------------
Dev_W0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid XIP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 400
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\piprd\sapmnt\XIP\SYS\profile\XIP_DVEBMGS00_piprd
M pid 4620
M
M kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 4620) [dpxxdisp.c 1382]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpSysAdmExtCreate: J2EE Engine running with this server
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 45120 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FFE0050, size: 7177088)
M DpShMCreate: allocated sys_adm at 000000000FFE0060
M DpShMCreate: allocated wp_adm_list at 000000000FFE30B0
M DpShMCreate: allocated wp_adm at 000000000FFE32A0
M DpShMCreate: allocated tm_adm_list at 000000000FFEE2F0
M DpShMCreate: allocated tm_adm at 000000000FFEE340
M DpShMCreate: allocated wp_ca_adm at 0000000010531250
M DpShMCreate: allocated appc_ca_adm at 0000000010540C60
M DpShMCreate: allocated comm_adm at 0000000010550670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000106A2510
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000106A25C0
M DpShMCreate: allocated j2ee_adm at 00000000106A2600
M DpShMCreate: allocated ca_info at 00000000106A3580
M DpShMCreate: allocated wall_adm at 00000000106A3610
M DpCommAttachTable: attached comm table (header=0000000010550670/ft=0000000010550680)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Mon Sep 02 10:24:00 2013
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Mon Sep 02 10:24:01 2013
M ThInit: running on host piprd
M
M Mon Sep 02 10:24:02 2013
M calling db_connect ...
B Loading DB library 'D:\usr\sap\XIP\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\XIP\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\XIP\DVEBMGS00\exe\dboraslib.dll' is "720.00", patchlevel (0.327)
C Prepending D:\usr\sap\XIP\DVEBMGS00\exe to Path.
C Register application info.
C Oracle client version: 11.2.0.3.0, (dbsl 720 291112, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C
C Mon Sep 02 10:24:03 2013
C Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@XIP on connection 0 (nls 0) ... (dbsl 720 291112, UNICODE[2])
C Attaching to database server XIP (con=0, svchp=16482BE0, srvhp=16483530)
C Starting user session: OCISessionBegin(con=0, usr='/', svc=16482BE0, srv=16483530, usr=1659D130)
C Now '/@XIP' is connected: con=0, nls=0, session=308, time='2013-09-02 10:24:03'
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con=0, svc=16482BE0, usr=1659D130)
C Disconnected (con=0) from ORACLE.
C Connecting as SAPSR3/<pwd>@XIP on connection 0 (nls 0) ... (dbsl 720 291112, UNICODE[2])
C Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=16482BE0, srv=16483530, usr=1659D130)
C OCISessionBegin(OCI_DEFAULT) failed with SQL error 28001:
C ORA-28001: the password has expired
C Server handle (con=0,svchp=16482BE0,srvhp=16483530) detached
C *** ERROR => CONNECT failed with sql error '28001'
[dbsloci.c 15284]
B ***LOG BY2=> sql error 28001 performing CON [dbsh 1246]
B ***LOG BY0=> ORA-28001: the password has expired [dbsh 1246]
B ***LOG BY2=> sql error 28001 performing CON [dblink 544]
B ***LOG BY0=> ORA-28001: the password has expired [dblink 544]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1484]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11318]
M
M Info for wp 0
M
M pid = 4620
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server piprd_XIP_00 on host piprd (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Sep 02 10:24:03 2013
M * RELEASE 720
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 11599
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 867]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 303]
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 4620) [dpnttool.c 339]
and
----------------------------------------------------------------
Dev_disp
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid XIP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 400
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\piprd\sapmnt\XIP\SYS\profile\XIP_DVEBMGS00_piprd
pid 4916
kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4916) [dpxxdisp.c 1320]
shared lib "dw_xml.dll" version 400 successfully loaded
shared lib "dw_xtc.dll" version 400 successfully loaded
shared lib "dw_stl.dll" version 400 successfully loaded
shared lib "dw_gui.dll" version 400 successfully loaded
shared lib "dw_mdm.dll" version 400 successfully loaded
shared lib "dw_rndrt.dll" version 400 successfully loaded
shared lib "dw_abp.dll" version 400 successfully loaded
shared lib "dw_sym.dll" version 400 successfully loaded
shared lib "dw_aci.dll" version 400 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Sep 02 09:28:32 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >piprd_XIP_00 <
DpShMCreate: sizeof(wp_adm) 45120 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000E0C0050, size: 7177088)
DpShMCreate: allocated sys_adm at 000000000E0C0060
DpShMCreate: allocated wp_adm_list at 000000000E0C30B0
DpShMCreate: allocated wp_adm at 000000000E0C32A0
DpShMCreate: allocated tm_adm_list at 000000000E0CE2F0
DpShMCreate: allocated tm_adm at 000000000E0CE340
DpShMCreate: allocated wp_ca_adm at 000000000E611250
DpShMCreate: allocated appc_ca_adm at 000000000E620C60
DpShMCreate: allocated comm_adm at 000000000E630670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000E782510
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000000E7825C0
DpShMCreate: allocated j2ee_adm at 000000000E782600
DpShMCreate: allocated ca_info at 000000000E783580
DpShMCreate: allocated wall_adm at 000000000E783610
DpCommAttachTable: attached comm table (header=000000000E630670/ft=000000000E630680)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
Mon Sep 02 09:28:33 2013
<ES> 4094 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 4488
argv[0] = D:\usr\sap\XIP\DVEBMGS00\exe\jstart.EXE
argv[1] = D:\usr\sap\XIP\DVEBMGS00\exe\jstart.EXE
argv[2] = pf=\\piprd\sapmnt\XIP\SYS\profile\XIP_DVEBMGS00_piprd
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=XIP
argv[7] = -DSAPMYNAME=piprd_XIP_00
argv[8] = -DSAPPROFILE=\\piprd\sapmnt\XIP\SYS\profile\XIP_DVEBMGS00_piprd
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1706]
***LOG Q0K=> DpMsAttach, mscon ( piprd) [dpxxdisp.c 12674]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >piprd_XIP_00 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Mon Sep 02 09:28:34 2013
CCMS: AlMsUpload successful for D:\usr\sap\XIP\DVEBMGS00\log\ALMTTREE.DAT (1858 MTEs).
Mon Sep 02 09:28:35 2013
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Mon Sep 02 09:28:58 2013
***LOG Q0I=> NiIRead: P=127.0.0.1:58589; L=???: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5087]
*** ERROR => NiIRead: SiRecv failed for hdl 41/sock 1332
(SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:58589; L=???) [nixxi.cpp 5087]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4488)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Sep 02 09:29:13 2013
*** ERROR => DpHdlDeadWp: W0 (pid 3736) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W1 (pid 3884) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W2 (pid 4352) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W3 (pid 912) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W4 (pid 4192) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W5 (pid 3320) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W6 (pid 5176) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W7 (pid 6104) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W8 (pid 4584) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W9 (pid 1108) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W10 (pid 4388) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W11 (pid 4684) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W12 (pid 4364) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W13 (pid 1944) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W14 (pid 4688) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W15 (pid 1664) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W16 (pid 4836) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W17 (pid 3248) died (severity=0, status=0) [dpxxwp.c 1727]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:23 2013
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Sep 02 03:59:23 2013
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 BTC -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 BTC -1 Ended no no 1 0 0 NO_ACTION
16 SPO -1 Ended no no 1 0 0 NO_ACTION
17 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Mon Sep 02 03:59:23 2013
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 3 | 2000 | 5 | 5 |
+------+--------+--------+--------+------------+------------+
| DIA | 4 | 4 | 2000 | 4 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 3 ( 42%), shm 4 ( 57%)
since last update total 7, udp 3 ( 42%), shm 4 ( 57%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.033333 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.033 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Mon Sep 02 03:59:23 2013
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T20, U21, , , 09:28:35, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Sep 02 03:59:23 2013
=============================
Slots: 1000, Used: 1, Max: 1
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:28 2013
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >piprd_XIP_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [piprd_XIP_00 ], types 187 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0B0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 10)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (444) (SOFT_KILL)
DpHalt: stop icman
killing process (5108) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 20
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T20
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T20/M0
NiBufSend starting
NiIWrite: hdl 33 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T20 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 33 in set0
SiSelNSet: set events of sock 1324 to: ---
NiBufISelRemove: remove hdl 33 from set0
SiSelNRemove: removed sock 1324 (pos=4)
SiSelNRemove: removed sock 1324
NiSelIRemove: removed hdl 33
DpDelSocketInfo: del info for nihdl 33 (pos/type=4/3)
NiICloseHandle: shutdown and close hdl 33/sock 1324
NiBufIClose: clear extension for hdl 33
dp_tm_adm[20].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1378094373/148000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 20
DpListRemove: remove elem 20 from tmadm_inuse_list
DpListRemove: 20 elems in tmadm_inuse_list
DpListInsert: insert elem 20 into tmadm_free_list (at begin)
DpListInsert: 181 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:444 HANDLE:1168)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:29 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:444 HANDLE:1168 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:30 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:31 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:32 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:33 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:34 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:35 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:36 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:37 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:38 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:39 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:40 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:41 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:42 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:43 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:44 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:45 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5108 HANDLE:1184)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1333
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 02 09:29:46 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5108 HANDLE:1184 rc:0x0) [dpnttool2.c 147]
*** ERROR => [DpProcDied] Process died (PID:4488 HANDLE:1180 rc:0x1) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >piprd_XIP_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=piprd_XIP_00 , sapsysnr= 0, hostname=piprd
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0B0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00000001417B6CF0
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISndTypeOnce: send msg (ms hdr/msg 110/452 bytes) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
NiIRead: read for hdl 25 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 25 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 25 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
Mon Sep 02 09:29:47 2013
NiIPeek: peek for hdl 25 timed out (r; 1000ms)
NiIRead: read for hdl 25 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13071]
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (piprd / 3901)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1204 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1204 (pos=3)
SiSelNRemove: removed sock 1204
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0B0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF40
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 25/sock 1204
NiBufIClose: clear extension for hdl 25
MsIDetach: detach MS-system (piprd / 3901)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4916) [dpxxdisp.c 11581]
DpHalt: Good Bye .....
Thanks & Regards,
Satish Kumar K
Hi,
In my SAP EP sytem while starting server I get an error 'IGS Watchdog could not be started'.
Is there any possibilities to fix this error or I need to reinstall again.
Thanks,
Sri
Dear experts,
Since a couple of hours this error occurs in our BI system:
| Logon | Connection Error |
| Error Details | Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 |
| Error Details | ERROR: program Trex_SID_20120228124608 not registered |
| Error Details | LOCATION: SAP-Gateway on host server.domain.tld / sapgw00 |
| Error Details | DETAIL: TP Trex_SID_20120228124608 not registered |
| Error Details | COMPONENT: SAP-Gateway |
| Error Details | COUNTER: 2486 |
| Error Details | MODULE: gwr3cpic.c |
| Error Details | LINE: 1789 |
| Error Details | RETURN CODE: 679 |
| Error Details | SUBRC: 0 |
| Error Details | RELEASE: 720 |
| Error Details | TIME: Wed Dec 5 14:18:03 2012 |
| Error Details | VERSION: 2 |
After some minutes noone can log into the system, an error occurs which says all processes are in use. Any help will be apreciated!
Kind regards,
Jann
Hello - We are performing a system copy from one AS-Java Machine to another. Both are running SAP NetWeaver 7.0 EHP1 SP5.
-
Export from Source without errors.
Import to Target ended with errors.
-
The error complains we had a perm license installed and a temp cannot be installed. It also complaiins that the "External System is not available" but the database is verified available. The JLAUNCH procs do not exist but at this point of the procedure I wouldn't expect them to be. Got most of the way thru the system copy procedure and ended with the following error:
Any help you can provide would be greatly appreciated.
-
Thanks. Steve
-
ERRORS Captured:
INFO 2010-03-08 14:44:44.435 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/licenseinstaller.log.
TRACE 2010-03-08 14:44:44.613 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 876590
INFO 2010-03-08 14:44:44.624
CJSlibModule::writeInfo_impl()
Output of /usr/java14_64/bin/java -classpath /tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/install/sharedlib/launche
r.jar -Xmx256m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.engine.tools.offlinelikeyinst.InstallFirstTempLicense /usr/sap/Q
O1/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/QO1/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/QO1/SYS/global/secur
ity/lib/tools/iaik_smime.jar:/usr/sap/QO1/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/QO1/SYS/global/security/lib/tools/w3c_
http.jar:/tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/install/lib:/tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CEN
TRAL/AS-JAVA/install/sharedlib:/usr/sap/QO1/JC00/exe/db2jcc.jar:/usr/sap/QO1/JC00/exe/db2jcc_license_cu.jar /tmp/sapinst_instdir/NW7
01/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/licenseinstaller.properties is written to the logfile licenseinstaller.log.
WARNING 2010-03-08 14:44:51.923
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/java14_64/bin/java -classpath /tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/install/s
haredlib/launcher.jar -Xmx256m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.engine.tools.offlinelikeyinst.InstallFirstTempLi
cense /usr/sap/QO1/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/QO1/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/QO1/
SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/QO1/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/QO1/SYS/global/securit
y/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/install/lib:/tmp/sapinst_instdir/NW701/LM/COP
Y/DB6/SYSTEM/CENTRAL/AS-JAVA/install/sharedlib:/usr/sap/QO1/JC00/exe/db2jcc.jar:/usr/sap/QO1/JC00/exe/db2jcc_license_cu.jar /tmp/sap
inst_instdir/NW701/LM/COPY/DB6/SYSTEM/CENTRAL/AS-JAVA/licenseinstaller.properties" finished with return code 13. Output:
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.path)
No matching license keys found.A permanent license key for "J2EE-Engine_DB6" already existed in the system. You can't install anothe
r temporary license key for "J2EE-Engine_DB6".
TRACE 2010-03-08 14:44:51.926
NWException thrown: ind-rel.ind-os.ind-db.j2ee-eng.tempLicense.sysNotAvailable:
Error when installing temporary license. DIAGNOSIS: External systems are not available. SOLUTION: Check connection to DB and messagi
ng service.
TRACE 2010-03-08 14:44:51.927
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.j2ee-eng.tempLicense.sysNotAvailable
WARNING[E] 2010-03-08 14:44:51.928
CJSlibModule::writeError_impl()
CJS-20019 Error when installing temporary license. DIAGNOSIS: External systems are not available. SOLUTION: Check connection to DB
and messaging service.
TRACE 2010-03-08 14:44:51.929 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
Hi,
I have loaded the data from Flat File to Infocube. The status of the request is Green. But no records are added into infocube.
The data is available in PSA.
Hi,
I've installed TRIAL VERSION of SAP Netweaver 7.0 on windows XP. A lot of document links ask for 'Service marketplace' login and password. I tried to register as a new user on
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/new_user_pass/infouser_request.htm
There it asked for 'Customer or Installation Number'.
In SAPGUI I found this information:
active hardware key: F1085946347
Installation NUmber: DEMOSYSTEM
License expires on : 19.09.2009
system no: 000000000311147814
I tried to register with 'Installation Number: DEMOSYSTEM' on above mentioned site but it gave me error.
How can I get login and password? I need to access various guides. Please help me on this.
Thanks and regards.
We seem to be having a problem with the imports. We are unable to export transports from dev system. We get the error below
The error below refers to some problem reading from table TCETARG. This table holds transport target groups. We have since deleted the group and have re-created again, still no luck with the import. We did tp connection tests and other tests on all levels to all systems and they dont report any problems at all. Any pointers to the problem would be helpful as the error code doesn't yield much when searched on market place, scn and internet.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Test call of transport control program (tp) ended with return code 0237
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK SIDK888888 pf=/usr/sap/trans/bin/TP_DOMAIN_SID.PFL -Dtransdir=/usr/sap/trans/bin/TP*.PFL"
which checks the export requirements, returned the following information:
Return code from tp: 0237
Error text from tp: ERROR: unknown error during select from TCETARG
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Regards
Kalyan
udc file is SAP recording file
may I know how to open .udc file? i try to download uPerform, but it says:
Vignette is the leading provider of enterprise solutions that power complex business processes, manage content lifecycles and enhance internal and external collaboration. These solutions blend collaboration and knowledge management capabilities and integrate tightly with email, portals, instant messaging, and line of business applications – creating a comprehensive environment where teams get their work done faster and with higher quality.
To get an account or technical assistance, please contact your Vignette Collaboration administrator.
any other ways, any free software can open udc file?
Hello everyone, my name is anand and i have 1 year sap basis adm. exp., i want to know that is sap hana is good for future? what are the responsibility for sap hana administrator?
Dear All,
I am working on a IS-U project as a BI 7.3 developer.
When a particular parent feeder is shutdown for maintenance, the DTs to which it supplies load/KWH will be routed to a temporary replacement feeder. When the parent feeder is up again the DTs are routed back. At the end of the month, this feeder and its child aggregate DTs will show discrepancy in per month reading because DTs reading > Parent feeder DT. Total DT redaing will consider load during supplied during the time its parent was shutdown.
This activity should be standard in IS-U because would be the case in every utilities enterprise. An activity that reconciles parent feeder and replacement readings to match child DTs aggregate reading. In short between the parent feeder and DTs reading there should be minimum loss% (loss through copper wires is inevitable) But I am not able to find this in IS-U and is there a standard BW extractor which shows that the discrepancy between feeder reading and DTs is due to which replacement feeder and how much KWH was transferred during maintenance time?
This same scenario applies to DT to consumer.
Regards,
Cleo.
Hi,
Can somebody help me to get the features of ECC 6.0 EHP7?
Regards,
Sandy Sam
Hello,
I need to consume a web service in ABAP from a non-SAP application. The web service uses wsse:UsernameToken with PasswordDigest in the SOAP Header for authentication. However, I havent seen any documentation for using Password Digest in ABAP.
Is it possible to use Password Digest in ABAP?
Thanks
Ajay
Hi experts, how are things? Here is all great.
We have here at our company, the Enterprise Portal installed and running over version 7.3 SP08. We use the Apache with ProxyReverse and SAP WEB Dispatcher to the logon balance, because we have 1 DB+CI and 2 Application servers.
Some times ago we started a project to use only the SAP WEBDISPATCHER with Proxy Reverse, because we understand that this sofwtare can run both (Redirect and Logon balance).
But we have some doubts and I need to ask, if you could help us.
For example: We need to redirect :
FROM: http://server.domanin:port/irj/portal
TO: https://ourwebsite.domain/irj/portal, all in HTTPS protocol.
About the SSL we made the configuration and it is running fine.
Have you ever seen this rule before or configured it?
If you could help us, we would be appreciate.
Thanks
Marcos
